[c-nsp] elam packet capture

[Thilak T]

Thanks for the quick reply. I am running 12.2(18)SXF10a , "test mcast ltl
index " doesn't seem to work.However in this case I could find the interface
number since I know where the was CSS connected. Can you guide me find the
index number someotherway.?


Here is what I did to find out.

bbr00m1#*show tcam interface gigabitEthernet 1/47 qos type1 arp detail*
* Global Defaults not shared
--------------------------------------------------------------
T     - V(Value) M(Mask) R(Result)
A     - ARP Packet
R     - RARP Packet
X     - XTAG
--------------------------------------------------------------
*Interface: 46 *  label: 511   lookup_type: 1  ##### *DEST_INDEX  [19] =
0x2E*  is *Interface: 46 *
protocol: ARP   packet-type: 3
+-+-----+--+-+------------+---------------+
|T|Index|AR|X| Dest Node  |  Source Node  |
+-+-----+--+-+------------+---------------+
 V 36839 -- 0      0      0 <-
 M 36845 -- 0      0      0 <-
 R rslt: 0           <-

On Wed, Dec 24, 2008 at 12:52 AM, Arie Vayner (avayner)
<avayner at cisco.com>wrote:

> Thilak,
>
>
> Try running this command:
>
> Router-sp#test mcast ltl index ef
> index 0xEF contain ports 4/48
>
> (in your case change ef with 2e)
>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Thilak T
> Sent: Wednesday, December 24, 2008 10:06
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] elam packet capture
>
> Hello
>
> Can anyone please guide me to understand how to find out physical
> interface
> to DEST_INDEX mapping. I did a elam capture to trave a IP packet going
> to a
> CSS VIP.
>
> RBUS data:
> SEQ_NUM                          [5] = 0x17
> CCC                              [3] = b100 [L3_RW]
> CAP1                             [1] = 0
> CAP2                             [1] = 0
> QOS                              [3] = 0
> EGRESS                           [1] = 0
> DT                               [1] = 0 [IP]
> TL                               [1] = 0 [B32]
> FLOOD                            [1] = 0
> *DEST_INDEX                       [19] = 0x2E*
> VLAN                             [12] = 250
> RBH                              [3] = b010
> RDT                              [1] = 0
> GENERIC                          [1] = 0
> EXTRA_CICLE                      [1] = 0
> FABRIC_PRIO                      [1] = 0
> L2                               [1] = 0
> FCS1                             [8] = 0x1
> IP_TOS_VALID                     [1] = 1
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>