[c-nsp] multicast routing to VLAN1?

[Ziv Leyes]

First, I must ask this, did you make sure you have the global command "ip multicast-routing"
Then on every interface you want to participate, you better use "ip pim sparse-dense-mode"

Ziv
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of William
Sent: Monday, February 04, 2008 1:33 PM
To: [c-nsp]
Subject: [c-nsp] multicast routing to VLAN1?

Hi,

We have a 4500+SUP4 running 12.1.19 EW1, running IOS throughout.

We have a requirement to push multicast packets from VLAN200 (routed)
to VLAN1 (routed, VLAN1 used because of legacy issues).

On both VLAN interfaces we have ip pim sparse mode enabled, and have
also added join statements to try to get it working.

We are unable to get the multicast pushed over to VLAN1, we can see
the machine(s) pumping out the multicast onto VLAN200 but nothing
getting across.

Is there some limitation because of the use of VLAN1? or am I missing
something else?

Cheers,

W
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/





************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************





 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************