[c-nsp] Multipoint L2TPV3 tunnel / MPLS VPN over IP Tunnel

[Masood Ahmad Shah]

Well, router is 7507 running with 12.4(16) rsp-jk9o3sv-mz.124-16.bin... I
believe that 12.4 enterprise image is supporting such features... 

Is there any special release to get the advantages of multipoint L2TPV3
tunnel over 7500 or 7200...

Regards,
Masood Ahmad shah
 

-----Original Message-----
From: Oliver Boehmer (oboehmer) [mailto:oboehmer at cisco.com] 
Sent: Tuesday, February 05, 2008 12:23 PM
To: Masood Ahmad Shah; cisco-nsp at puck.nether.net
Subject: RE: [c-nsp] Multipoint L2TPV3 tunnel / MPLS VPN over IP Tunnel

Masood Ahmad Shah <> wrote on Monday, February 04, 2008 11:47 PM:

> Is there any low end Cisco router for the multipoint L2TPV3 tunnel to
> configure MPLS VPN over IP Tunnel. I just can't buy Cisco 12000 only
> for the multipoint L2TPV3 tunnel. I was expecting a support of
> "tunnel mode l2tpv3" in Cisco 7500 but I just can't see it. :(

according to www.cisco.com/go/fn, the "MPLS VPNs over IP Tunnels"
feature is available in recent 12.0S on 7200, 7500, 10700 and GSR. Which
release are you using? The command syntax is "tunnel mode l3vpn l2tpv3
multipoint" on the tunnel..

	oli