[c-nsp] EoMPLS between 7600 & 7200 config clarification

[David Granzer]

On 2/6/08, Peter Rathlev <peter at rathlev.dk> wrote:
> On Wed, 2008-02-06 at 06:36 -0500, Jose wrote:
> > One quick side question since we're all talking EoMPLS.  Is it possible
> > to do VLAN translation/remapping with EoMPLS?  Can one side have SVI 800
> > and the other side have SVI 400 but use VC 300 on both xconnect
> > statements to "tie them" together?
>
> AFAIK, it's not possible with PFC EoMPLS. You have to use the same VLAN
> on both sides when doing subinterface EoMPLS.

When doing subinterface EoMPLS you can use different vlan on each
side. I have tested this with 122-33.SXH. If the EoMPLS mode is VC
type 5 (Eth VLAN) then the pseudowire doesn't carry dot1.q
information.

David