[c-nsp] WS-X6348-RJ-45 and Output drops

[Justin Shore]

Gert Doering wrote:

>> The 6148A model has 5.3MB of buffer per port whereas the plain 6148 only 
>> has 128KB.  That might suit his needs too.
> 
> Watch out.  I think you're comparing 100Mbit modules with GigE modules.
> 
> If I remember correctly, the 6148A is actually "6148A-GE-TX", while
> there is also an "6148-RJ-45", which is 100 Mbit only.

It looks like there are a handful of A models out there including the 
WS-X6148A-RJ-45.  You're right though; I was looking at the 100Mb card 
though.  Table 5 didn't list speed and I assumed it was GigE.  Good catch.

> And the price difference between a WS-X6348-RJ-45 (10/100) and a 6748
> (GE, Fabric only, not in Sup2 switches, etc.) is significant :-)

Baaah, a mere pittance.  Nobody these days has anything less than a 
Sup720, right?  :-)

Justin