[c-nsp] pix question

[Ultramajestic]

I have an active and a passive pix failover configuration, the situation
is that the passive node is not reachable, I can't do ping neither
telnet.

I think I should go there with my laptop and serial cable since I am not
sure if the serial number is available as stick :-/

El jue, 07-02-2008 a las 10:34 -0800, Jay Hennigan escribió:
> Ziv Leyes wrote:
> > How far away are you from that device? Can't you just plug a console cable to it and check?
> 
> If he is close enough to plug in a console cable, he's probably close 
> enough to read the serial number on the nameplate.
> 
> --
> Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
> Impulse Internet Service  -  http://www.impulse.net/
> Your local telephone and internet company - 805 884-6323 - WB6RDV
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/