[c-nsp] catalyst 6500 not rewriting CoS / 802.1p bits

[Peter Rathlev]

On Sun, 2008-02-10 at 13:33 +0100, Peter Rathlev wrote:
> I think the Cat6500 has the "override" keyword, so you can add the line
> "mls qos cos override", which should do what you want, i.e. setting CoS
> 5 for all packets arriving at the port.

> On Sun, 2008-02-10 at 00:31 +0200, Vladimir Ivashchenko wrote:
> > Catalyst 3560 has "mls qos cos override" command, which seems to do
> > the trick, but this command is not available on Catalyst 6500.  

Sorry, I was a little too fast there. I had overseen that part of your
mail. Thought the 6500 had the command, but I can see it doesn't.

After re-reading the documentation I can see the point: When using "no
mls qos trust" the "mls qos cos 5" should actually catch all packets.

Anyway, an input service-policy should do it.

Regards,
Peter