[c-nsp] IOS for NBAR on 7206VXR/300

[Christian Koch]

just get rid of the 300... :)

On Feb 11, 2008 7:56 PM, Ben Steele <ben at internode.com.au> wrote:

> Be careful if your going to run 12.4 on a NPE-300 or less when you
> have BGP and especially MPLS VPN's as you start to run into memory
> problems which for me resulted in unstable routing tables.
>
> 12.3(14)T7 is working well for me on NPE-300's with BGP/MPLS VPN's and
> also capable of doing NBAR, you can probably just put any extra PDLM's
> you require into flash if they aren't already in NBAR for you.
>
> Ben
>
> On 12/02/2008, at 11:13 AM, Adam Greene wrote:
>
> > Hi,
> >
> > Any suggestions for a stable advanced ip services 12.4 IOS for
> > 7206VXR-NPE300 which will support BGP routing and NBAR?
> >
> > Looks like the last peer-to-peer protocol recognition enhancement
> > was done in 12.4(4)T.
> >
> > I wonder if 12.4(4)T is stable in general. It's the T which scares
> > me. And it's an older processor. Maybe I shouldn't worry.
> >
> > Thanks,
> > Adam
> >
> >
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>