[c-nsp] CAB-SFP-50CM= question

[Tolstykh, Andrew]

First thing I tried after getting the err-disable :-)
It works fine in the lab, but for production configuration I decided to
stick with the GLC-T GBIC option and use CAB-SFP-50CM= for connectivity
between 3560's only.

-----Original Message-----
From: Robert Hass [mailto:robhass at gmail.com] 
Sent: Tuesday, February 12, 2008 5:05 AM
To: Tolstykh, Andrew
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] CAB-SFP-50CM= question

On Feb 12, 2008 5:21 AM, Tolstykh, Andrew <ATolstykh at integrysgroup.com>
wrote:
> The interface will end up in the err-disabled state due to the
> "unsupported gbic detected" message, at least that's what I got in the
> lab when I attempted to interconnect 3560's and 3750's with 2960's.

Can you try to add below commands:

service unsupported-transceiver
no errdisable detect cause gbic-invalid
no errdisable detect cause sfp-config-mismatch

and interconnect above switches again ?

Robert
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential
and/or privileged material.  Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon,
this information by persons or entities other than the intended recipient is prohibited.   If you received this in error, please
contact the sender and delete the material from any computer.