[c-nsp] Cisco7609 as P layer

[Hyunseog Ryu]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
 
It's been 3 years since we run Cisco 7609 routers as P node for MPLS 
networks.
Cisco recommended it. :-)

Hyun
Saku Ytti wrote:
| On (2008-02-12 11:48 +0100), Gert Doering wrote:
|  
|> As far as I understand, VPLS will *not* work on Sup720 as PE devices 
- but
|> a P device won't see what's in there, so shouldn't care.
|
| ACK, not in LAN cards. However you can buy one box with SIP/ES20's
| as VPLS hub, where you connect EoMPLS from different PE boxes and
| if you have multiple hubs you full mesh them. Creating decent
| experience of VPLS to end customers with fraction of the cost.
| If you have multiple VPLS hubs, you can even use backup tunnels
| in case one hub breaks down.
|

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
 
iD8DBQFHsi73ZkEzJIVS03MRAl8WAJ9ei8Xv7hbDqUA35luzJuhQ32PsLQCgmSK0
U5dfcU/6K4rUWsCkcGfdMto=
=8R+X
-----END PGP SIGNATURE-----