[c-nsp] cisco-nsp Digest, Vol 63, Issue 71

[Rob Montgomery]

Anyone seen this:   Have a router set up with one static NAT translation for
remote access.  About every other day, the ability to RDP in from the
outside is lost.  To restore, I have to "no" the command and then re-enter
it.  And then it works.  no other functionality is lost (site-to-site VPN,
user access to Internet, default gateway, etc., all remain good).  I have
looked at the debug options but it seems with nat, it is either all or
nothing.which plays havoc with a syslog server.

Rob