[c-nsp] "sh run" bug

[Dmitry Kiselev]

Hello!

Does anybody see such problems with running configuration building?
Subject router is 7200-NPE-G1 under 12.2(25)S14, uptime about 17 weeks.
Contact TAC? No other solutions?


Router#sh run
% String too long to write to nvram (2098):
Current configuration : 124735 bytes
!
! Last configuration change at 01:08:53 EET Mon Feb 18 2008
! NVRAM config last updated at 01:08:53 EET Mon Feb 18 2008
!
version 12.2
parser config cache interface
...

Router#sh run interface GigabitEthernet0/1.101
Building configuration...

% String too long to write to nvram (2098):
Current configuration : 5 bytes
end

Router#
Router#sh startup-config | beg interface_GigabitEthernet0/1.101
interface GigabitEthernet0/1.101
 encapsulation dot1Q 101
 ip address X.X.X.1 255.255.255.0
...

Router#copy run start
Building configuration...

% String too long to write to nvram (2098):[OK]
Router#sh startup-config | beg interface_GigabitEthernet0/1.101
Router#


-- 
Dmitry Kiselev