[c-nsp] %SBETH-3-ERRINT on NPE-G1

[e ninja]

Cassidy,

Take a look at CSCei46978 - http://mysolvr.com/?show=1.15418 . The fixes for
i46978 should be in 12.4 mainline hence you may give it a shot.

Out of curiosity, if all your 7200s with NPE-G1s run the same IOS release
and the only difference is the NPE rev, what happens when you swap this
C-rev NPE with an A-rev NPE? Do the errors persist on this chassis or do
they 'follow 'the C-rev NPE?

/eninja




On Sat, Feb 9, 2008 at 11:58 PM, <alandaluz at gmail.com> wrote:

> I moved a bunch of PPPoE sessions over to a 7200 with a new NPE-G1 this
> evening.
>
> Every 30 minutes or so I get an error similar to this:
>
> Feb 10 00:47:43 MST: %SBETH-3-ERRINT: GigabitEthernet0/2, error interrupt,
> mac_status = 0x0000000000840000
>
> Seen it on both G0/1 and G0/2.  Unfortunately, this causes my OSPF
> sessions
> to bounce for a few seconds causing some grief.
>
> Currently running C7200-ADVENTERPRISEK9-M on 12.4(6)T10, but have also
> tried
> 12.4(9)T7, 12.4(15)T3 and 12.4(15)T1.
>
> Anybody have any clues? I almost at wits end.
>
> Appears this NPE-G1 is a "revision C". My other NPE-G1's are "revision A"
> and do not exhibit this issue.
>
> Thanks,
>
> Cassidy
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>