[c-nsp] SUP 720 3BXL + 2 BGP Full View + MPLS VPN
Pavel Kuzin
pk at nodex.ru
Thu Feb 28 15:35:15 EST 2008
Hi!
Thanks for your reply.
I have just simple MPLS and BGP config too.
#sh run | in mpls
mpls ldp loop-detection
mpls label protocol ldp
mpls mtu 1540
mpls ip
mpls mtu 1540
mpls ip
mpls mtu 1540
mpls ip
mpls ldp router-id Loopback0 force
#sh mpls interfaces
Interface IP Tunnel BGP Static Operational
Vlan100 Yes (ldp) No No No Yes
Vlan410 Yes (ldp) No No No Yes
Vlan301 Yes (ldp) No No No Yes
> hi pavel,
>
> i must admit, i'm not an mpls guru, but im working on it ;) whilst i
> can't offer you any direct solution, i can say i'm a bit fascinated by
> this because i have for example a sup720 3bxl taking 3 x full views 243k
> routes per peer, have mpls tag switching enabled on 5 SVI's and i dont see
> the behaviour you see.
>
> router#sh mpls int | i Vl Vlan2 Yes (ldp) No
> Yes
> Vlan3 Yes (ldp) No Yes
> Vlan4 Yes (ldp) No Yes
> Vlan12 Yes (ldp) No Yes
> Vlan14 Yes (ldp) No Yes
>
>
> router# sh ip bgp sum Neighbor V AS MsgRcvd MsgSent TblVer
> InQ OutQ Up/Down
> State/PfxRcd
> 61.88.xxx.xx 4 7474 19165667 424902 69092680 0 0 21w2d
> 243009
> 61.88.xxx.xx 4 7474 20943846 426386 69092680 0 0 5w2d
> 243007
> 220.157.xx.x 4 9723 12753587 15032863 69092733 0 0 2w0d
> 243093
>
>
> router#sh platform hardware cap | b L3 Forward L3 Forwarding Resources
> FIB TCAM usage: Total Used
> %Used
> 72 bits (IPv4, MPLS, EoM) 524288 246423
> 47%
> 144 bits (IP mcast, IPv6) 262144 5
> 1%
>
>
> router#sh mpls ip bind sum Total number of prefixes: 1453
>
>
> Generic label bindings
> assigned learned prefixes in labels out labels 1453
> 1446 13042
>
>
> my mpls config is pretty straight forward
>
> mpls label range 16 256000 mpls label protocol ldp no tag-switching ip
> propagate-ttl tag-switching tdp router-id Loopback0 force
>
> ... very curious !!
>
>
> hardware is sup720 pfc3bxl with ios 12.2(18)SXF8
>
> kind regards,
>
> --matt
>
>
>
>
>
More information about the cisco-nsp
mailing list