[c-nsp] Code for an old 2924XL with working SNMP?

[Ramcharan, Vijay A]

Not sure if these might help. 
http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB-archives  


 
Vijay Ramcharan 
  
-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Chris Boyd
Sent: January 10, 2008 13:54
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Code for an old 2924XL with working SNMP?

Looking for code for a couple of older 2924XLs that has working SNMP  
for a proof-of-concept project.

I'm running
IOS (tm) C2900XL Software (C2900XL-H-M), Version 11.2(8)SA2, RELEASE  
SOFTWARE (fc1)
with RTG, and the numbers I'm getting from the switch are totally bogus.

Checking the Cisco web site it looks like all the available stuff is  
too big to fit in the 4096K/1024K bytes of memory in the box.

Suggestions and pointers appreciated.

--Chris

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/