[c-nsp] Code for an old 2924XL with working SNMP?

[Chris Boyd]

Thanks, they probably will once I get my CCO reactivated again :- 
(  Apparently got deleted again with their latest "upgrade."

--Chris

On Jan 10, 2008, at 1:20 PM, Ramcharan, Vijay A wrote:

> Not sure if these might help.
> http://www.cisco.com/cgi-bin/tablebuild.pl/cat2900XL-4MB-archives
>
>
>
> Vijay Ramcharan
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Chris Boyd
> Sent: January 10, 2008 13:54
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Code for an old 2924XL with working SNMP?
>
> Looking for code for a couple of older 2924XLs that has working SNMP
> for a proof-of-concept project.
>
> I'm running
> IOS (tm) C2900XL Software (C2900XL-H-M), Version 11.2(8)SA2, RELEASE
> SOFTWARE (fc1)
> with RTG, and the numbers I'm getting from the switch are totally  
> bogus.
>
> Checking the Cisco web site it looks like all the available stuff is
> too big to fit in the 4096K/1024K bytes of memory in the box.
>
> Suggestions and pointers appreciated.
>
> --Chris
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/