[c-nsp] EIGRP Distribute-list w/Address-family

[Collins, Richard (SNL US)]

 I don't know if it works with VRF's but one hack could be to create
a second unique AS eigrp process for that interface(network).  Use that
AS for
it's remote router.  You can then redistribute between the two and
filter accordingly.

-Rich

->Message: 2
>Date: Wed, 16 Jan 2008 01:10:50 -0800
>From: "Darryl Dunkin" <ddunkin at netos.net>
>Subject: [c-nsp] EIGRP Distribute-list w/Address-family
>To: <cisco-nsp at puck.nether.net>
>Message-ID:
	<56F5BC5F404CF84896C447397A1AAF202D847D at MAIL.nosi.netos.com>
Content-Type: text/plain;	charset="us-ascii"

>I've noticed that you cannot specify an interface in address family
>configuration mode for a distribute list. I also confirmed this is
>specifically stated in the IOS documentation as such.

>However, I have a single interface in a VRF instance of EIGRP I need to
>filter updates in on, while leaving the rest of the interfaces
unfiltered.

>Does anyone know of any workarounds I could use to make this happen?
>Currently using 12.2(18)S.