[c-nsp] dlsw command

[Jorge Evangelista]

I had had similar issues with other routers Cisco Soho91, when I set
interface wan to work to a 10Full Duplex force, it could not see in
the configuration, I solve it upgrading my IOS, maybe you have to do it.




2008/1/17 Hiromasa Sekiguchi <hiromasa.sekiguchi at ctc-g.co.jp>:

> Hi,
>
> The below command didn't reflect to running-config
> when we configured on cisco1700.
>
> The commands is below.
>
> (1) dlsw local-peer peer-id [ip-address]
> (2) dlsw remote-peer [list-number tcp [ip-address]
>
> (1) and (2) is OK.
>
> (3) dlsw remote-peer [list-number] tcp [ip-address] backup-peer
> [ip-address]
>
> Only (3) is NG...
>
> After reboot c1700, we configured them again.
> They reflect to running-config normally.
>
> Are there any similar issues?
>
> Regards,
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
"The network is the computer"