[c-nsp] BFD for static routes

[Phil Bedard]

Couple of days ago.

router#
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp- 
IPSERVICES-M), Version 12.2(33)SRC, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2008 by Cisco Systems, Inc.
Compiled Fri 11-Jan-08 09:42 by prod_rel_team

ip route static bfd GigabitEthernet3/2 172.16.1.2

However this makes me unhappy:

router#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
router(config)#vlan 200
router(config-vlan)#bfd ?
% Unrecognized command

Phil



On Jan 17, 2008, at 1:38 PM, Arie Vayner (avayner) wrote:

> BFD for static routes is supported in SRC, which should be out in a  
> day
> or two (if they keep their promise ;-) )
> http://www.cisco.com/en/US/products/ps6922/prod_release_note09186a00806c
> 096f.html#wp4248936
>
> Arie
>
> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Phil Bedard
> Sent: Wednesday, January 09, 2008 19:37 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] BFD for static routes
>
> 	Is there BFD support for static routes on anything besides IOS
> XR?
> Is there a timeline for such support?
>
> Phil
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/