[c-nsp] seeing VLAN-tagged device with layer 2 switch

[Jay Hennigan]

Rogelio wrote:
> I've got an interesting problem.  I've got some non-Cisco wireless units 
> that are VLAN tagged, and for whatever reason, they're not working, and 
> I'm going to need to pull them down from a roof and troubleshoot them.
> 
> Any ideas on what I might do to see them if I were to use a layer 2 
> non-VLAN-friendly switch?  That's all I have immediately available.

Crossover cable and ifconfig on any *nix box or Macintosh to set up the 
appropriate VLAN.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/
Your local telephone and internet company - 805 884-6323 - WB6RDV