[c-nsp] bandwidth points table (former Three STM-1 on one Cisco 7200vxr-npeG1)

[Mathias Spoerr]

http://www.cisco.com/en/US/prod/collateral/routers/ps341/prod_presentation09186a008009184d.pdf


Regards,
Mathias



From:
Andrey Oleinik <Andrey_Oleinik at bms-consulting.com>
To:
Garry <gkg at gmx.de>
Cc:
"cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
Date:
16.07.2008 15:00
Subject:
Re: [c-nsp] bandwidth points table (former Three STM-1 on one Cisco 
7200vxr-npeG1)



Gentlemen,
Saying about Cisco it's very new and interesting matrices for me (I mean 
bus/interface bandwidth points).
Is this info available publicly?
Thank U
--
Respect,  Andy Oleynik

...
andyo> > Is it recommended to run three STM-1 (PA-POS-1OC3)  on a single
andyo> > Cisco700vxr with NPE-G1 ?
andyo>
andyo> Technically, it is supported, as each of the two buses have 600
andyo> bandwidth points, with an STM-1 interface taking up 300. Question
andyo> is
andyo> whether it might be recommendable to get a second router for
andyo> redundancy
andyo> reasons, e.g. if you are terminating several uplinks with that one
andyo> router. If so, I'd advise against doing it all on one router ...
...
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/x-pkcs7-signature
Size: 7943 bytes
Desc: S/MIME Cryptographic Signature
URL: <https://puck.nether.net/pipermail/cisco-nsp/attachments/20080716/e02941c6/attachment.bin>