[c-nsp] multilink ds3's

[Rodney Dunn]

We strongly discourage that because of the packet reordering overhead
at those rates.

If it goes to the BU for support they will deny it.


Rodney

On Thu, Jul 17, 2008 at 08:46:47PM -0400, Jared Brown wrote:
> Hello,
> I wanted to check to see if there would be any issue with multilinking 2
> serial ds3's on a pa-2t3 card. I know the IOS supports it, but I was worried
> about all the overhead and the proc load. Each end would have a
> 7206vxr/npe-g1 and pa-2t3 cards. Thanks.
> 
> Jared
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/