[c-nsp] Cisco/HP 3020 refuses telnet

[David Prall]

What does "sh line" give you, are all the vty's in use/hung? What does "who"
have to give you?

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of matthew zeier
> Sent: Sunday, July 20, 2008 9:28 PM
> To: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] Cisco/HP 3020 refuses telnet
> 
> 
> 
> Peter Rathlev wrote:
>  > On Sun, 2008-07-20 at 16:15 -0700, matthew zeier wrote:
>  >> I have a Cisco/HP 3020 blade chassis switch that all of a 
> sudden stopped
>  >> accepting telnet (because rancid started to fail config checks).
>  >>
>  >> Short of rebooting I'm not sure how to fix.  I can login 
> on the console
>  >> (using tacacs auth of all things, so IP works) and can 
> ping it.  But
>  >> telnet gives a connection refused.  I've even go so far 
> as changing the
>  >> IP address on fa0.
>  >>
>  >> Any clues/ideas?
>  >
>  > How do you log in now? Through the 
> management-webinterface? Can you see
>  > the running config, and see if there are any 
> "access-class" defined in
>  > you "line vty" config that would deny you access?
>  >
>  > I might also be "management-interface"-related. The IGESM 
> switches we
>  > use (mainly IBM) mostly only accept connections to the 
> interface Vlan
>  > marked with the "management" command. (Btw: Changing the management
>  > interface is a little unintuitive, but well explained in the docs.)
> 
> I have four chassis and 8 of these switches all basically 
> with the same 
> config.  Only one is no longer accepting telnet.  I can only 
> login to it 
> from the serial console.
> 
> In fact, the first thing I checked with the vty and access 
> list (there 
> isn't one) and then I diff'd the config to the other working 
> switch in 
> that same chassis.
> 
> I hate these Cisco-but-not-really-Cisco switches so much (no TAC 
> support!).  I like the ease of wiring but they're such a pain 
> that I've 
> now started buying the pass-through ethernet modules and running 32 
> cables to two 3650s!
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/