[c-nsp] Renaming interfaces on a PIX 525

[Steven Pfister]

We have a pair of PIX 525s (active/standby), and the 2900 switch they're attached to is going to be replaced very shortly. The outside interface, which is currently Ethernet0, will then be moved to GigabitEthernet1. What's the best way to do this? Can I just rename the Ethernet0 interface to outside.old, and rename the GigabitEthernet interface to outside, then move the ip addressing? Will that work?

Thanks!

--Steve

Steve Pfister
Technical Coordinator, 
The Office of Information Technology
Dayton Public Schools
115 S. Ludlow St. 
Dayton, OH 45402
 
Office (937) 542-3149
Cell (937) 673-6779
Direct Connect: 137*131747*8
Email spfister at dps.k12.oh.us