[c-nsp] T1 configuration

[Justin M. Streiner]

On Mon, 9 Jun 2008, Paul Stewart wrote:

> controller T1 6/0/0
> framing esf
> linecode b8zs
>
> I expected to see serial interfaces further down in the configuration but
> nothing is showing... I checked Cisco.com and it keeps referencing
> configuration on the Serial interfaces (which is the way we have it on
> 5350/5400 boxes for channelized).  Is this because I need to configure
> timeslots still on the controller?

Yes, you need to configure the timeslots.  That command is what binds a 
TDM resource (T1, DS3, DS0 channel on a T1, etc) to a particular serial 
interface.

jms