[c-nsp] T1 configuration

[Nick Griffin]

Yes, they will display in the configuration after your time slots are
provisioned.

On Mon, Jun 9, 2008 at 11:15 AM, Paul Stewart <paul at paulstewart.org> wrote:

> Hi there..
>
> We have a 6509 (sup2) installed and about to bring up some T1 interfaces on
> it.. confused over the configuration and only have a limited window of time
> to try and implement off hours tonight ;)
>
> WS-X6182-2PA port adapters with PA-MC-8T1 cards are installed in this
> box...
>
> Currently, the configuration shows:
>
> controller T1 6/0/0
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/1
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/2
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/3
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/4
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/5
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/6
>  framing esf
>  linecode b8zs
> !
> controller T1 6/0/7
>  framing esf
>  linecode b8zs
>
> I expected to see serial interfaces further down in the configuration but
> nothing is showing... I checked Cisco.com and it keeps referencing
> configuration on the Serial interfaces (which is the way we have it on
> 5350/5400 boxes for channelized).  Is this because I need to configure
> timeslots still on the controller?
>
> Thanks,
>
>
> Paul
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>