[c-nsp] Best way to filter local traffic from Internet traffic

root net rootnet08 at gmail.com
Tue Jun 10 12:42:35 EDT 2008


Yes this is right, we control the routing...

On Tue, Jun 10, 2008 at 6:57 AM, Wink <dwinkworth at wi.rr.com> wrote:

> You control the routing on your side, the customer doesn't necessarily have
> to do anything... right?
>
>
> root net wrote:
>
>> I do not think shaping traffic would work as I am not trying to throttle
>> his
>> traffic to everyone else but our local LAN I want to provide a circuit
>> that
>> only allows local LAN traffic meaning our directly connected customers
>> routes only not any other routes.  BGP would definitely work but I am not
>> sure if we can do this with this customer.  Is there an alternative
>> towards
>> BGP like with a ACL or route-map maybe?
>>
>> -rootnet08
>>
>> On Tue, Jun 10, 2008 at 4:40 AM, a. rahman isnaini r.sutan <
>> risnaini at indo.net.id> wrote:
>>
>>
>>
>>> Rate-Limit/Traffic Shape Group ?
>>>
>>>
>>> rgsour
>>> a. rahman isnaini r.sutan
>>>
>>>
>>> root net wrote:
>>>
>>>
>>>
>>>> This customer is pretty savvy so BGP may be possible.  But if not then
>>>> what?
>>>>
>>>> On Mon, Jun 9, 2008 at 4:26 PM, Justin M. Streiner <
>>>> streiner at cluebyfour.org>
>>>> wrote:
>>>>
>>>>  On Mon, 9 Jun 2008, root net wrote:
>>>>
>>>>
>>>>>  I have a customer that wants a 100/1000 Mb/s pipe into our network for
>>>>> our
>>>>>
>>>>>
>>>>>
>>>>>> local customers.  This customer is also a customer but he has a
>>>>>> dedicated
>>>>>> 10
>>>>>> Mb/s circuit to the Internet and is maxing out on bandwidth.  Wishes
>>>>>> to
>>>>>> buy
>>>>>> the 100/1000 Mb/s pipe for our local network access only not Internet.
>>>>>>  What
>>>>>> is the best way to filter this?
>>>>>>
>>>>>>  If you're running BGP with this customer, or can do so, you can feed
>>>>>>
>>>>>>
>>>>> them
>>>>> your local and customer routes and you can have them announce their
>>>>> blocks
>>>>> to you over that pipe.  Use the knobs that BGP provides, such as local
>>>>> preference or MED to make the prefixes sent and received over the
>>>>> 100/1000
>>>>> Mb/s pipe preferred over their normal transit pipe.  This will push
>>>>> traffic
>>>>> between your network and theirs over the higher bandwidth link, and
>>>>> only
>>>>> use
>>>>> the 10 Mb/s pipe if the larger one is down.
>>>>>
>>>>> That's a pretty simplistic view of it and doesn't take into account any
>>>>> other connectivity the customer might have.
>>>>>
>>>>> jms
>>>>> _______________________________________________
>>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>>
>>>>>  _______________________________________________
>>>>>
>>>>>
>>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>>
>>>>
>>>>  _______________________________________________
>>>>
>>>>
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>>
>>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>>
>>
>>
>


More information about the cisco-nsp mailing list