[c-nsp] conditional dot1q

[David Freedman]

Sounds like you want EVC, unfortunately, this is only supported on 
7600+ES20 at present (somebody correct me if other platforms support 
this currently)

Dave.

Pavel Skovajsa wrote:
> Hello all,
> 
> I have more customers coming to my switch into one trunk port. One of
> those customers has decided to have more than one vlan, and have to do
> a dot1q for him. Is there a way to configure this:
> - if a frame comes to my trunk trunk port with tag 10-100, make a
> dot1q tunnel with some vlan number
> - any other vlan is transported normally.....
> 
> Any idea how this could be done? It probably depends on the switch
> model, so feel free to recommend that too...
> 
> Regards,
> Pavel
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>