[c-nsp] Syslog alert generated -- %PM_SCP-SP-2-LCP_FW_ERR_INFORM

[Eric Cables]

I did a quick search, but couldn't find any reports of this error, or
whether it requires replacement or not.  A search revealed some matches, but
none referencing inline power problem.  Has anyone seen this before?

Jun 12 09:42:21.655 PDT: %PM_SCP-SP-2-LCP_FW_ERR_INFORM: Module 6 is
experiencing the following error: Inline Power Module - PS 3.3V bad

Here's output from show mod with relevant info:

Mod Ports Card Type                              Model              Serial
No.
--- ----- -------------------------------------- ------------------
-----------
  6   48  48-port 10/100 RJ45 Ethernet Module    WS-X6148A-45AF     xxxxx

Mod MAC addresses                       Hw    Fw           Sw
Status
--- ---------------------------------- ------ ------------ ------------
-------
  6  0019.554e.3910 to 0019.554e.393f   4.0   8.4(1)       8.5(0.46)RFW Ok

Mod  Sub-Module                  Model              Serial       Hw
Status
---- --------------------------- ------------------ ----------- -------
-------
  6  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1028URS7  2.0    Ok

Mod  Online Diag Status
---- -------------------
  6  Minor Error

-- 
Eric Cables