[c-nsp] Cisco 7513 problem

[Ganbold]

Hi,

I'm seeing following log on my Cisco 7513 router:

00:07:58: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:08:03: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:08:10: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:08:13: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:08:20: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:08:22: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:08:55: %RSP-5-SLAVEUP: Slave changed to state Running, Buffer memory 
state : disabled
00:08:55: %HA-5-MODE: Operating mode is hsa, configured mode is rpr.
00:15:30: %SYS-5-CONFIG_I: Configured from console by console
00:16:24: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:16:29: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:16:36: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:16:38: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:16:46: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:16:48: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:17:17: %SYS-5-CONFIG_I: Configured from console by console
00:17:18: %RSP-5-SLAVEUP: Slave changed to state Running, Buffer memory 
state : disabled
00:17:18: %HA-5-MODE: Operating mode is hsa, configured mode is rpr-plus.
00:18:07: %SYS-5-CONFIG_I: Configured from console by console
00:18:52: %SYS-5-CONFIG_I: Configured from console by console
00:19:25: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:19:29: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:19:36: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:19:39: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:19:46: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:19:49: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:20:18: %RSP-5-SLAVEUP: Slave changed to state Running, Buffer memory 
state : disabled
00:20:18: %HA-5-MODE: Operating mode is hsa, configured mode is rpr-plus.
00:25:22: %SYS-5-CONFIG_I: Configured from console by console
00:25:57: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:26:02: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:26:09: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:26:12: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:26:19: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
00:26:22: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
00:26:51: %RSP-5-SLAVEUP: Slave changed to state Running, Buffer memory 
state : disabled
00:26:51: %HA-5-MODE: Operating mode is hsa, configured mode is rpr.
01:12:45: %RSP-3-SLAVECHANGE: Slave changed state from Slave to 
Non-participant
01:12:47: %RSP-3-SLAVECHANGE: Slave changed state from Non-participant 
to Slave
...

----------------------------------------------------------
rtr1#sh ver
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-ISV-M), Version 12.2(18)S10, RELEASE SOFTWARE 
(fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by cisco Systems, Inc.
Compiled Fri 16-Sep-05 04:03 by ccai
Image text-base: 0x40011198, data-base: 0x41A66000

ROM: System Bootstrap, Version 12.0(10r)S1, RELEASE SOFTWARE (fc1)
BOOTLDR: RSP Software (RSP-BOOT-M), Version 12.0(11)S3, EARLY DEPLOYMENT 
RELEASE SOFTWARE (fc1)

core1-ub uptime is 1 hour, 25 minutes
System returned to ROM by reload at 12:39:19 GMT Thu Apr 17 2008
System restarted at 09:41:46 GMT Fri Jun 13 2008
System image file is "sup-slot0:/rsp-isv-mz.122-18.S10.bin"

cisco RSP8 (R7000) processor with 262144K/8216K bytes of memory.
R7000 CPU at 250Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3 Cache
Last reset from power-on
G.703/E1 software, Version 1.0.
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Bridging software.
Chassis Interface.
1 FEIP2 controller (1 FastEthernet).
1 VIP4-50 RM5271 controller (1 FastEthernet).
3 VIP4-80 RM7000 controllers (1 FastEthernet)(2 GigabitEthernet).
3 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)
2043K bytes of non-volatile configuration memory.

46976K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
16384K bytes of Flash internal SIMM (Sector size 256K).
Slave in slot 6 is halted.

Slave in slot 6 is halted.
Configuration register is 0x102
----------------------------------------------------------

The problem is the router stops working normally. What could be the problem?
I'm suspecting one of VIPs. Correct me if I'm wrong here.

thanks in advance,

Ganbold



-- 
What we cannot speak about we must pass over in silence. -- Wittgenstein