[c-nsp] PA-MC-T3 and NPE300

[David Coulson]

Peder @ NetworkOblivion wrote:
> Is anybody using one or more PA-MC-T3 cards with a 7200vxr with NPE300? 
In the past.
>  If so, what kind of performance are you seeing with basic config 
> (mlppp enabled, but not nat, fw or bgp)? 

It seemed happy. I used CEF per-packet rather than MLPPP. I know people 
have loaded up a NPE-400 with 6 PA-MC-2T3 cards and not had problems.

I can't imagine you would have a problem with this configuration, other 
than the NPE-300 being 'unsupported'.

David