[c-nsp] fabric switching enable

[Peter Rathlev]

On Tue, 2008-06-17 at 18:59 -0400, Paul wrote:
> OK.. What device is this?  7600? 6500?  If it's a 6500 the Sup720 should 
> be in slot 6

It's Sup720 as far as I can see in OPs output. Whether it's 6500 or 7600
is probably of less relevance here. Where is slot 6 in a 6504 or 6503
chassis? ;-)

> The WS-X6148-GE-TX will run in Bus mode as that is all it supports..

But the other modules should run in truncated mode.

> I would get rid both of the modules and put in CEF720 modules (WS-X67....)

They can be quite expensive compared to the 6100 series, and if all you
need is a wiring closet card, then 6148 should be fine. The new A model
has larger buffers than 6748 and 6724. :-)

Regards,
Peter