[c-nsp] fabric switching enable

[Paul]

Yea we have 6509's so I was thinking of that one. I don't see many 6506 
or smaller any more :P

Don't like mixing modules, just a personal thing.. I like consistency :) 
but you are right they are rather expensive and for low bandwidth 
applications the other ones work great still..



Peter Rathlev wrote:
> On Tue, 2008-06-17 at 18:59 -0400, Paul wrote:
>   
>> OK.. What device is this?  7600? 6500?  If it's a 6500 the Sup720 should 
>> be in slot 6
>>     
>
> It's Sup720 as far as I can see in OPs output. Whether it's 6500 or 7600
> is probably of less relevance here. Where is slot 6 in a 6504 or 6503
> chassis? ;-)
>
>   
>> The WS-X6148-GE-TX will run in Bus mode as that is all it supports..
>>     
>
> But the other modules should run in truncated mode.
>
>   
>> I would get rid both of the modules and put in CEF720 modules (WS-X67....)
>>     
>
> They can be quite expensive compared to the 6100 series, and if all you
> need is a wiring closet card, then 6148 should be fine. The new A model
> has larger buffers than 6748 and 6724. :-)
>
> Regards,
> Peter
>
>
>
>