[c-nsp] Vs Ethernet over MPLS on Cisco 6500 with SUP2 and MFC2

[Zahid Hassan]

Hi,


I have over a dozen of EoMPLS tunnels running in production over years on
7609s
with OSM-4GE-WAN-GBIC linecards running 12.1(22)E1 without any problems.


Regards,


Zahid 



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of sthaug at nethelp.no
Sent: 16 June 2008 18:23
To: arla at rn.dk
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Vs Ethernet over MPLS on Cisco 6500 with SUP2 and MFC2

> Is it possible to run EoMPLS on a 6500 with sup2 module.
> If, what software release do I need to get hold off.

It's possible *if* you also have OSM cards - but I'd strongly recommend not
to do it. Too many bugs.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/