[c-nsp] PC plugged into Cisco 1841 - cant do full/100?

[Alasdair Gow]

is your PC set to 100 Full also?

if not and its set to auto, the cisco will be at 100full and the PC will 
default to 100 Half

either configure both to 100 full or both to auto.


PS, you have done a no shut on the cisco yes?

Cheers,
Alasdair

William wrote:
> Hi,
>
> Might be something very obvious I'm missing here, but why can't my
> Cisco 1800 router configure its interface fa0/0 to 100/full (matched
> on the PC) and not go up/up?
>
> TIA.
>
> W
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>   


-- 
Alasdair Gow
Lumison
t: 0845 1199 900
d: 0131 514 4042

P.S. Do you love Lumison?

If so, please help us get nominated in the 2008 PC Pro Awards by
completing a short questionnaire:
http://www.lumison.net/pcpro

In completing the survey, you get a chance to win one of £3,500 worth of
prizes, including a laptop, two satnavs or a 22inch widescreen monitor!


--

This email and any files transmitted with it are confidential and intended
solely for the use of the individual or entity to whom they are addressed.
If you have received this email in error please notify the sender. Any
offers or quotation of service are subject to formal specification.
Errors and omissions excepted.  Please note that any views or opinions
presented in this email are solely those of the author and do not
necessarily represent those of Lumison and nPlusOne.
Finally, the recipient should check this email and any attachments for the
presence of viruses.  Lumison and nPlusOne accept no liability for any
damage caused by any virus transmitted by this email.