[c-nsp] PC plugged into Cisco 1841 - cant do full/100?

[Fredrik Jacobsson]

Ummm...have you tried a crossover cable instead of a regular one?
auto-mdix usually only work if speed is auto

Regards
/Fredrik


2008/6/19, William <willay at gmail.com>:
> Hi,
>
> Might be something very obvious I'm missing here, but why can't my
> Cisco 1800 router configure its interface fa0/0 to 100/full (matched
> on the PC) and not go up/up?
>
> TIA.
>
> W
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>