[c-nsp] TCP behavior under strict CAR rate-limiting

[Antonio Querubin]

On Thu, 19 Jun 2008, Antonio Querubin wrote:

> Those burst values appear to be far below the recommended values for most 
> cases.  See the following:
>
> http://www.cisco.com/en/US/docs/ios/12_2/qos/command/reference/qrfcmd8.html
>
> In your case, if your target rate-limit is 10000000, then 1875000 and 3750000 
> are what you probably should be using for the burst.

Ugh, never mind - I didn't notice the previous message farther down...

Antonio Querubin
whois:  AQ7-ARIN