[c-nsp] Terminal Server menu system config

[Justin Shore]

My 2511 died some time back (PSU failed I think) but I was wondering if 
one could point a static route (/32) at an Async line and redistribute 
that into the IGP.  Then you could write a simple bash wrapper around 
telnet to connect you to that specific IP.  The only thing I don't know 
is if you'd be able to connect to it on tcp/23 or if you'd also have to 
use the assigned rotary port in the 2000 range.  I suppose it's possible 
to use PBR to redirect tcp/23 on a specific IP to a specific local 2000 
port if needed.  Or you could just write a wrapper around telnet to use 
Lo0 and the assigned rotary port.  You might test it both ways to see if 
one works.

Justin

Eric Helm wrote:
> Hi, I'm configuring some 2511RJs for a lab terminal server environment. 
> I'm interested in using the IOS menu system to ease user access to the 
> async lines. Does anyone have a good sample configuration to send my way?