[c-nsp] Terminal Server menu system config

[Tassos Chatzithomaoglou]

You can use the following as a start:

menu CONSOLES prompt %
Please make a selection : %

menu CONSOLES text 1 Console to R1
menu CONSOLES command 1 telnet x.x.x.x 2001
menu CONSOLES text 2 Console to R2
menu CONSOLES command 2 telnet x.x.x.x 2002
menu CONSOLES text 3 Console to R3
menu CONSOLES command 3 telnet x.x.x.x 2003
....
menu CONSOLES text 0 Exit the Menu
menu CONSOLES command 0 menu-exit

menu CONSOLES clear-screen
menu CONSOLES line-mode


More details can be found in:
http://www.cisco.com/en/US/docs/ios/12_4/cfg_fund/configuration/guide/cfh400_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1001601

--
Tassos

Eric Helm wrote on 3/3/2008 8:24 μμ:
> Hi, I'm configuring some 2511RJs for a lab terminal server environment. 
> I'm interested in using the IOS menu system to ease user access to the 
> async lines. Does anyone have a good sample configuration to send my way?
> 
> Regards,
> Eric
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>