[c-nsp] ASA help configuration

[Andrew Froehlich]

If you are using the base ASA license, there is a limitation of traffic flow
on 3 routed VLANS.  You have to issue the following command to get the 3rd
vlan to work:

ASA(config-if)# no forward interface (vlan-number)

This limits you to being able to receive traffic on the VLAN but not sending
it.  If you need 3 VLANs to be able to all send and receive traffic to
eachother, then you'll have to upgrade to the security plus license.




On 3/6/08 10:18 AM, "cisco-nsp-request at puck.nether.net"
<cisco-nsp-request at puck.nether.net> wrote:

> ASA help configuration


********************************************************************************
This e-mail is intended only for the use of the individual or entity to which
it is addressed and may contain information that is privileged and confidential.
If the reader of this e-mail message is not the intended recipient, you are 
hereby notified that any dissemination, distribution or copying of this
communication is prohibited. If you have received this e-mail in error, please 
notify the sender and destroy all copies of the transmittal. 

Thank you
University of Chicago Medical Center 
********************************************************************************