[c-nsp] I need help. Cisco Etherswitch PoE Module Not Powering IP Phones

[Scott McGrath]

What hardware are you using.   From this display it looks like no power 
is available from the device

If this is on a Catalyst 4000 for instance even if the blade has PoE you 
need a separate power shelf to actually
supply the PoE it does not take power from the system supply.  

Felix Nkansah wrote:
> Hi All,
>
> This is to provide more info towards helping me solve the problem.
>
> When I do "show power inline" in the module, I get the output below in the
> first lines.
>
> Module   Available     Used     Remaining
>           (Watts)     (Watts)    (Watts)
> ------   ---------   --------   ---------
> 1             n/a        n/a         n/a
>
>
>
> Felix
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>