[c-nsp] 12008 GRPB memory problem.

Troy Beisigl troy at i2bnetworks.com
Mon Mar 10 14:00:36 EDT 2008


Does anyone know why a 12008 with dual GRPBs with 256M each would run out of
memory with a single full BGP feed? We have a 7507 RSP4 with 256M and it
runs fine with about 50M free. The GSR runs out of memory and shuts off dCEF
and stops functioning when connected in place if the 7507. We are upgrading
the RAM in it to 512M, but this seems strange that we would be using more
ram in one router than we would in the other. 

 

 

 

core2#sh ip bgp sum

BGP router identifier 66.181.X.X, local AS number 21XXX

BGP table version is 231585, main routing table version 231362

 

Mar  8 08:19:04: %SYS-2-MALLOCFAIL: Memory allocation of 65536 bytes failed
from 0x502658E8, alignment 16 

Pool: Processor  Free: 37664  Cause: Not enough free memory 

Alternate Pool: None  Free: 0  Cause: No Alternate pool 

 

-Process= "BGP Router", ipl= 0, pid= 163

-Traceback= 5026AB04 5026CF08 502658F0 500E3FD0 501111D8 5011C0F4 50126CCC
5014F6B4 505FD664 505C95D4 505CC42C 508A4630 508A4D84 508A5B0C 50F8DDB0
508A5BD83119 network entries using 352447 bytes of memory

3119 path entries using 162188 bytes of memory

55062/0 BGP path/bestpath attribute entries using 7268184 bytes of memory

35785 BGP AS-PATH entries using 945782 bytes of memory

4 BGP community entries using 96 bytes of memory

696 BGP route-map cache entries using 22272 bytes of memory

0 BGP filter-list cache entries using 0 bytes of memory

BGP using 8750969 total bytes of memory

BGP activity 231366/231361 prefixes, 231365/231361 paths, scan interval 60
secs

 

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down
State/PfxRcd

38.101.X.X  4   174   41164       8        0    0    0 00:00:28 Idle

38.104.X.X   4   174       9      10        0    1    0 00:00:28 Connect

core2#

Mar  8 08:19:08: %BGP-5-ADJCHANGE: neighbor 38.101.X.X Down No memory

Mar  8 08:19:08: %BGP-5-ADJCHANGE: neighbor 38.104.X.X Down No memory

Mar  8 08:19:40: %BGP-3-NOTIFICATION: sent to neighbor 38.101.X.X 3/1
(update malformed) 0 bytes  FFFF FFFF FFFF FFFF FFFF FFFF FFFF FFFF 0052
0200 0000 3440 0101 0040 0208 0203 00AE 1587 3120 4003 0426 65A1 A680 0404
0000 DF0D 4006 00C0 0706 3120 C223 B71C C008 0800 AE52 0840 F703 E80E 59C0
1557 ED10

Mar  8 08:19:40: %BGP-5-ADJCHANGE: neighbor 38.104.X.X Up 

Mar  8 08:19:45: %BGP-5-ADJCHANGE: neighbor 38.101.X.X Up 

Mar  8 08:19:51: %FIB-2-FIBDOWN: CEF has been disabled due to a low memory
condition.

 It can be re-enabled by configuring "ip cef [distributed]" 

Mar  8 08:20:25: %OSPF-5-ADJCHG: Process 21623, Nbr 66.X.X.X on
FastEthernet2/0 from FULL to DOWN, Neighbor Down: Dead timer expired

 

 

 

Troy Beisigl



 



More information about the cisco-nsp mailing list