[c-nsp] T1 Bonding with PA-MC-T3

[Jason Berenson]

Nick,

Why don't you just use MLPPP?  That's a DS1 channelized DS3 card.

-Jason

Nick Voth wrote:
> Guys,
>
> I have a 7206 VXR with a PA-MC-T3 card in it for doing T1's off of a
> channelized DS3. I know the PA-MC-T3 doesn't support MLPPP bonding of
> multiple T1's. The problem is, my NPE doesn't support the newer PA-MC-T3-EC
> enhanced card that works for T1 bonding.
>
> I know I could feed the DS3 to some separate Mux and pull individual T1's
> off of that and bond them in a different Cisco card. Problem is, that's not
> really a very "clean" solution for us and definitely adds some other links
> in the chain that could fail.
>
> SO, is there any way to accomplish T1 bonding with that existing DS3 card or
> am I just stuck?
>
> Thanks very much for any help.
>
> -Nick Voth
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>