[c-nsp] T1 Bonding with PA-MC-T3

[Nick Voth]

I guess that would be my question. I was under the impression that MLPPP
won't work with that DS3 card. Am I mistaken?

Thanks,

-Nick

> From: Jason Berenson <jason at pins.net>
> Date: Fri, 14 Mar 2008 18:30:39 -0400
> To: Nick Voth <nvoth at estreet.com>
> Cc: "cisco-nsp at puck.nether.net" <cisco-nsp at puck.nether.net>
> Subject: Re: [c-nsp] T1 Bonding with PA-MC-T3
> 
> Nick,
> 
> Why don't you just use MLPPP?  That's a DS1 channelized DS3 card.
> 
> -Jason
> 
> Nick Voth wrote:
>> Guys,
>> 
>> I have a 7206 VXR with a PA-MC-T3 card in it for doing T1's off of a
>> channelized DS3. I know the PA-MC-T3 doesn't support MLPPP bonding of
>> multiple T1's. The problem is, my NPE doesn't support the newer PA-MC-T3-EC
>> enhanced card that works for T1 bonding.
>> 
>> I know I could feed the DS3 to some separate Mux and pull individual T1's
>> off of that and bond them in a different Cisco card. Problem is, that's not
>> really a very "clean" solution for us and definitely adds some other links
>> in the chain that could fail.
>> 
>> SO, is there any way to accomplish T1 bonding with that existing DS3 card or
>> am I just stuck?
>> 
>> Thanks very much for any help.
>> 
>> -Nick Voth
>> 
>> 
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>