[c-nsp] T1 Bonding with PA-MC-T3

[Jon Lewis]

On Fri, 14 Mar 2008, Nick Voth wrote:

> I have a 7206 VXR with a PA-MC-T3 card in it for doing T1's off of a
> channelized DS3. I know the PA-MC-T3 doesn't support MLPPP bonding of
> multiple T1's. The problem is, my NPE doesn't support the newer PA-MC-T3-EC
> enhanced card that works for T1 bonding.

PA-MC-T3 in a 7206 supports MLPPP just fine.  What it doesn't allow is 
bonding of multiple individual T1s into single >T1 serial interfaces.

You can also do per-packet cef load sharing, but if there's any VOIP going 
over the circuits, MLPPP is prefered.

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________