[c-nsp] SNMP query for just one interface?

[Bill Nash]

Find the ifIndex for the one interface, and instead of doing a table walk, 
just append that ifIndex to whichever interface object you're polling and 
do simple gets.

ifDescr.6
ifOperStatus.6
ifAdminStatus.6
etc.

- billn


On Fri, 21 Mar 2008, Bernd Ueberbacher wrote:

> Hi everyone!
>
> One more problem before the weekend ;-)
>
> Is it somehow possible to query just ONE interface of a Cisco router/switch?
> I need to see the traffic going through a certain interface, but this
> tiny "management" PC shouldn't see the other ports.
>
> I found a website which points into the right direction (I guess),
>
> snmp-server community public ro
> snmp-server community ourCommStr ro
> snmp-server community topsecret rw 60
> snmp-server community hideit ro view noRouteTable
>
> access-list 60 permit 10.1.1.1
> access-list 60 permit 10.2.2.2
>
> snmp-server view noRouteTable internet included
> snmp-server view noRouteTable ip.21 excluded
> snmp-server view noRouteTable ip.22 excluded
> snmp-server view noRouteTable ifMIB excluded
>
>
> but I'm still to stupid to query just one port without seeing anything
> else (other ports, cpu, ...)
>
> Please let me know/give me a hint how this can be done.
>
>
> Thanks and have a nice weekend everybody,
> Bernd
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>