[c-nsp] 6509 noob question

[Jonathan Charles]

You need to console in and set the SC0 interface up, then you can telnet to it.



Jonathan

On Tue, Mar 25, 2008 at 3:20 PM, Adam Greene <maillist at webjogger.net> wrote:
> How's this for a stupid question?
>
>  I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS 12.1(8a)E3.
>
>  I can telnet to the devices and access the IOS CLI.
>
>  The million-dollar question: how to I access the CatOS CLI?
>
>  As far as I can tell all the switch configs live in CatOS while the routing configs live in IOS, and I'm trying to gain access to the spanning-tree info (CatOS), to see if the switch is running PVST+, MST or what.
>
>  Thanks,
>  Adam
>  _______________________________________________
>  cisco-nsp mailing list  cisco-nsp at puck.nether.net
>  https://puck.nether.net/mailman/listinfo/cisco-nsp
>  archive at http://puck.nether.net/pipermail/cisco-nsp/
>