[c-nsp] 6509 noob question

[David Prall]

You need the management interface address for the catos side, from their you
can session to the msfc/msfc's. Can telnet from the msfc to the catos side
if you know the address. Might be able to figure out where it is from the
arp table.

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam Greene
> Sent: Tuesday, March 25, 2008 4:20 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 6509 noob question
> 
> How's this for a stupid question?
> 
> I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS 
> 12.1(8a)E3.
> 
> I can telnet to the devices and access the IOS CLI. 
> 
> The million-dollar question: how to I access the CatOS CLI?
> 
> As far as I can tell all the switch configs live in CatOS 
> while the routing configs live in IOS, and I'm trying to gain 
> access to the spanning-tree info (CatOS), to see if the 
> switch is running PVST+, MST or what.
> 
> Thanks,
> Adam
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/