[c-nsp] 6509 noob question

[David Prall]

Switch console can only be done from catos. You want to find and entry that
has a mac address within the cisco range. What does "sh cdp neighbor" give
you. I don't remember this working, but it has been a long time. Then "sh
cdp neighbor detail" for the address. Might get lucky.

David

--
http://dcp.dcptech.com
  

> -----Original Message-----
> From: Adam Greene [mailto:maillist at webjogger.net] 
> Sent: Tuesday, March 25, 2008 4:58 PM
> To: David Prall; cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] 6509 noob question
> 
> Thanks, all.
> 
> Neither the session nor switch console commands are 
> recognized on the IOS 
> side.
> 
> Is there anything specific I should look for in the ARP 
> table? There are 
> about 1000 entries in there.
> 
> I guess next step will be to call this switch's admin ....
> 
> thanks,
> Adam
> 
> ----- Original Message ----- 
> From: "David Prall" <dcp at dcptech.com>
> To: "'Adam Greene'" <maillist at webjogger.net>; 
> <cisco-nsp at puck.nether.net>
> Sent: Tuesday, March 25, 2008 4:45 PM
> Subject: RE: [c-nsp] 6509 noob question
> 
> 
> > You need the management interface address for the catos 
> side, from their 
> > you
> > can session to the msfc/msfc's. Can telnet from the msfc to 
> the catos side
> > if you know the address. Might be able to figure out where 
> it is from the
> > arp table.
> >
> > David
> >
> > --
> > http://dcp.dcptech.com
> >
> >
> >> -----Original Message-----
> >> From: cisco-nsp-bounces at puck.nether.net
> >> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Adam Greene
> >> Sent: Tuesday, March 25, 2008 4:20 PM
> >> To: cisco-nsp at puck.nether.net
> >> Subject: [c-nsp] 6509 noob question
> >>
> >> How's this for a stupid question?
> >>
> >> I'm working remotely on a pair of 6509's: CatOS 8.3(3) / IOS
> >> 12.1(8a)E3.
> >>
> >> I can telnet to the devices and access the IOS CLI.
> >>
> >> The million-dollar question: how to I access the CatOS CLI?
> >>
> >> As far as I can tell all the switch configs live in CatOS
> >> while the routing configs live in IOS, and I'm trying to gain
> >> access to the spanning-tree info (CatOS), to see if the
> >> switch is running PVST+, MST or what.
> >>
> >> Thanks,
> >> Adam
> >> _______________________________________________
> >> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> >
> >
> >
> >
> > 
> 
> 
> 
>