[c-nsp] Monitoring Tengigabit Interfaces

[DAVID Sébastien]

Hi,

 

I would like to monitor the Optical Power in the Ten Gigabit interface.

 

I use this command : show int teX/y transceiver. 

 

On some interfaces I've a answer :

 

1#sh int te2/1 transceiver

Transceiver monitoring is disabled for all interfaces.

 

ITU Channel not available (Wavelength not available),

Transceiver is internally calibrated.

If device is externally calibrated, only calibrated values are printed.

++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.

NA or N/A: not applicable, Tx: transmit, Rx: receive.

mA: milliamperes, dBm: decibels (milliwatts).

 

                                         Optical   Optical

         Temperature  Voltage  Current   Tx Power  Rx Power

Port     (Celsius)    (Volts)  (mA)      (dBm)     (dBm)

-------  -----------  -------  --------  --------  --------

Te2/1      38.5       0.00       7.9      -1.9      -3.0

 

 

But for another I have :

 

#sh int gi9/1 transceiver

Diagnostic Monitoring Data is not available.

 

Why this command failed on some interfaces ?

 

Regards,

 

Sébastien DAVID

 

Service Exploitation Réseau

Ecritel
site de Clichy : 7-9, rue Petit
92582 Clichy Cedex
Tél: 01.73.02.50.76
Fax: 01.47.56.04.48 
Email: kourif at ecritel.net <mailto:jmlemoine at ecritel.net> 
Site web: www.ecritel.fr <http://www.ecritel.fr/> 

This message and any attachments (the "message") is intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender. Any use not in accord with its purpose, any dissemination or disclosure, either whole or partial, is prohibited except formal approval. The internetcan not guarantee the integrity of this message. ECRITEL (and its subsidiaries) shall (will) not therefore be liable for the message if modified. 
---------------------------------------------
Ce message et toutes les pieces jointes (ci-apres le "message") sont etablis a l'intention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le detruire et d'en avertir immediatement l'expediteur. Toute utilisation de ce message non conforme a sa destination, toute diffusion ou toute publication, totale ou partielle, est interdite, sauf autorisation expresse. L'internet ne permettant pas d'assurer l'integrite de ce message, ECRITEL (et ses filiales) decline(nt) toute responsabilite au titre de ce message, dans l'hypothese ou il aurait ete modifie.